Air-Tec, one of our HVAC product lines, published a recent newsletter with some information we thought our customers would find valuable on the benefits of a pre-fabricated engine exhaust system. Here it is:

“Chicago customers are finding that the modular pre-fabricated engine exhaust system is their new choice over the old black schedule 40 installs to gain control and reduce the costs of your next emergency generator install. Why?

In material list alone, a pre-fabricated engine exhaust system sees an average 15-20% cost savings compared to the schedule 40. The costs for each system included inner pipe, insulation, outer jacket, bellows, fixed and guide supports.

But the much bigger savings were found in the labor costs. The modular pre-fabricated system is simply that. It comes in 304 stainless steel, 1”, 2” or 4” wool insulation and galvanized outer jacket ready to install by one trade. The outer jacket is also available in 304 stainless steel for harsh conditions or for the portion of the stack exposed to weather. In all cases the black schedule 40 pipe took considerably more time to complete each connection, suspend from the structure, was harder to handle, still needed to be insulated and then the galvanized jacket applied requiring three trades.

The logistics of scheduling the other two trades was also another consideration that was brought up several times.”

Since the material cost offers a considerable savings and the install time is typically done in less than half the time requiring only one trade, you can see the benefits of a pre-fabricated system.

For more information from Air-Tec on pre-fabricated systems and their new DuraStack Pro modular engine exhaust system, click here.

Or give us a call at 1-800-355-7061 with any question you may have on this new product or product line.

We are beyond excited to be celebrating our 20-year anniversary this month. We want to thank all of our customers and employees who have supported us in our growth thus far. We are honored to have earned your business and loyalty.

We interviewed our founder, Dennis O’Shaughnessy on what has changed over the past 20 years and where the company is going from here.

 

What prompted you to start Mechanical Equipment?

I was working as a Regional Sales Manager for Perma-Pipe (a company which we now represent). It was a great job and I learned a tremendous amount from my supervisor who later became the President of the company. But after twelve years of hotel beds and airplane meals (three and a half million miles), I wanted new challenges.

The company was extremely good to me and I hated to leave but I needed something else. I had done very well for Perma-Pipe and increased sales significantly in my region, so they really didn’t want to lose me either. So, my boss suggested that I become a manufacturer’s representative for their product! I loved the idea of getting back to direct customer sales, rather than management, and it seemed like an ideal solution for both Perma-Pipe and myself. It checked all the boxes I needed to have some new and exciting challenges. I left on the best of terms and will be forever grateful.

 

What’s the most satisfying achievement for Mechanical Equipment in the last 20 years?

I would have to say the positive impact that our company has had on the lives of our employees and our customers. Like most business owners, your colleagues become a personal responsibility for you. I really do feel like the people I work with inside our company, and those that I’ve been fortunate to get to know on a personal level outside the company, are like my work family. I don’t want to let anyone down or disappoint them. Of course, that isn’t always possible, but when it does happen, I can’t help but take it personally, even though I try to tell myself it’s just business. I’m happy that Mechanical Equipment has had a positive effect on their lives, and hopefully they feel like their lives are better for having worked here. I think they’d agree that Mechanical Equipment is a fun place to work!

 

What was a major turning point for the company where you grew, changed direction, or offered new services?

When I started Mechanical Equipment (there was no we then, just me) I only had two lines: Perma-Pipe and Advanced Thermal Systems expansion joints. I had a 10’ x 10’ office that Perma-Pipe let me use in exchange for training my replacement. Unfortunately, my two products were only on a small percentage of all the jobs that bid each year so I needed to find other product lines to represent, so I could generate a more even cashflow. Through help from customer suggestions and other rep firms that I had relationships with from my days at Perma-Pipe, we were able to generate interest from some manufacturers that wanted new or better representation in this marketplace. That was the significant turning point.

Everything changed as we started signing up other products. After we demonstrated that we could be successful with them, other manufacturers took notice and reached out to us to represent them. Our ability to sell a better product and more importantly service our customer’s needs with those products really took the company up to the next several levels. At times, it felt like I was hanging onto the tail of a runaway animal, but it was also very exciting! Now we have offices as well as 6,500 square feet of warehouse with a million dollars’ worth of inventory.

 

How has the industry changed since you started?

This is going to make me sound old but when I started at Perma-Pipe in 1987 the internet and email didn’t exist! Cell phones were just coming into the business world and were super expensive because you paid by the minute, so they were mostly used by upper management. I had a pager and would return calls from the airport when I got off the plane or from my local rep’s office wherever I happened to be that week.

So, most of our communications and business was conducted by phone and then confirmed in a letter that we mailed at the post office and received 3-5 days later. Don’t get me wrong, there are a lot of advantages with the rapid way that we communicate now, but nobody can deny that business and business relationships have become less personal.

 

Has there been anyone or any company who helped you most along the way?

I definitely need to recognize hundreds of people that made Mechanical Equipment possible. I really don’t want to name people because I’d be afraid that if I left someone out, they’d have hurt feelings. However, I do want to thank a few key people that were responsible making Mechanical Equipment possible.

My former boss Fati Elgendy. Fati took the raw talent in me, and taught me how to be a successful sales person, sales manager, and business man. He also taught me a great deal about life, during many long discussions after hours, and about any subject you could imagine. I learned the most in my professional career from him and I will be eternally grateful to him. Without a doubt, he is the smartest person I have ever spoken to, the finest “pure” salesman that I’ve ever worked with, and he was also the person that came up with the idea of putting me in business as a rep and created a flexible plan to enable my success.

I owe a huge thank you to my late parents, Bernie and Midge O’Shaughnessy. They loaned me money in order to establish credit with factories, banks, etc. I was very confident that I could and would succeed, however nobody provides the unwavering support like a parent. They talked me up when I got down, encouraged me when I got discouraged, and provided constant reinforcement whenever I had doubt. They kept me grounded by always reminding me that life can change on a dime, so never, ever take your good fortune for granted. To this day, I say thank you to every customer, for every order, no matter the amount, I am truly grateful.

Thank you to the factories that we represent. Without their belief and trust in Mechanical Equipment, we’d have a hard time growing the business and in turn our lives. I am humbled that they have allowed us to share their name on our letterhead, and for the support and good fortune they have brought to our company.

Thank you to our customers! None of this is even possible without them! When I first interviewed for my job at Perma-Pipe, I met with the owner of the company, Mr. David Unger. A wonderful, generous and unbelievably kind man that treated me like family. During my interview, he asked me “as a salesman, do you think you represent your company to your customer, or your customer to your company?” After thinking about the question for a moment, I told him that I felt that I represent my customer to the company, because without the customer, the company doesn’t need me! That truly is how I feel and how any successful sales person in any industry feels. Everything starts with a customer! You can’t make a sale, process an order, employ people to support the transaction or create a financial transaction, without a customer!

Finally, thank you from the bottom of my heart, to all of our employees! These people treat Mechanical Equipment as if it was their own company, and frankly, they have made it so. All of them bust their butts’ day in and day out for me and they’re the ones that deserve all of the credit. From estimating (putting out what I believe are the most detailed, complete and consistent quotations in the industry), to the inside sales support staff making sure your orders get shipped correctly and on time, to our inside sales team taking care of all the parts orders, and to the warehouse staying late for last minute emergency orders and deliveries. Everyone that touches a part of our business at Mechanical Equipment, does so with passion, dedication, and pride to do the best they can do every day. I am so fortunate to have assembled such a great team! As Leo Burnett, the founder of the greatest advertising agency in the world once said when he started his business, “Reach for the stars. You may not always catch one, but you won’t come up with a handful of mud either!”

 

What do you see for the company looking ahead? What should/could customers get excited about?

It’s hard for me to say, simply because even in my wildest imagination, I honestly never dreamed we’d be where we are today! I think the sky is the limit for Mechanical Equipment as long as we stay on our current path, and maintain the positive and grateful attitude we have now. Well known factory names continue to contact us, requesting representation in the Illinois market and that means continued growth. What business doesn’t want positive, controlled growth, right?

But we’re selective. We want to rep the best product lines and in turn do a great job for them. My strategy has always been to have no more than a dozen main product lines, and to become the industry leaders in product and system knowledge for those brands. Hopefully, we will continue to enjoy the relationships that we’ve developed with our customers over the last 20 years and continue to add more customers to the list!

Nexus Valve has launched a new product, the Flamco Pressure Step Deaerator (PSD) and we’ve got it for you.

A new and innovative tool, the unit utilizes vacuum technology to deaerate entrained air in hot or chilled water hydronics systems.

The compact design allows the PSD to be installed in almost any mechanical situation. The PSD is an efficient low-power consumption unit requiring only 110v and 3 amps to run, and is easy to program through simple LED readout controls.

Key Features

  • Password protection for parameter entry
  • Pressure settings in 1 PSI increments
  • Service reminder option (12 months)
  • Pump exercising option (2 second pulse if inactive for 60 days)
  • Event logging for pump start, pump run hours counter, electrical
  • Interruption and common alarm
  • Auxilary contacts for common fault
  • Pump fault, pressure transducer
  • Vacuum deaerating, turbo and normal interval modes
  • Pump inlet strainer and pump check valve
  • Glycol mixture up to 50%
  • Vacuum cylinder
  • Adjustable diff erential
  • MODBUS and RS485 connectivity
  • Will deaerate system volumes up to 39,625 gallons
  • Two year warranty

If you are interested in learning more about this product, download the brochure or give us a call at 800-355-7061. We’re happy to answer any of your questions or help design a system for your client.

We wanted to share a case story with you that involved one of the popular product lines we carry, Nexus Valves. We hope sharing this case story of how they solved a noise issue at a local University will give you some ideas on solutions your can provide your clients.

Recently Nexus Valve and one of their manufacturers’ representatives, Faco, were highlighted in HVAC/P magazine for a project that used the Dynamic, a combined pressure independent flow limiter and control valve, to solve a noise issue at a local university. The Dynamic, along with custom valve packages, were combined with the NexLok push-fit connection system to provide a fast, clean installation for the partnered contractors.

In the case story, you’ll see that Ball State University had an opportunity to renovate one of its popular residence halls,which is an eight-story building housing 450 students and features a computer lab, fitness room, lounge area, and laundry rooms. The building was 46 years old and residents were complaining of loud noise associated with the water pressure.

The University turned to Nexus Valve for a solution with the issue. Nexus Valve brought in their local manufacturer’s representative Faco to help solve the challenge and use this project as a training opportunity for their Dynamic Valves.

The result was to suggest a pressure independent control valve combined with a thermal motoric actuator to keep constant water pressure,which significantly reduces the noise level.

Not only did the solution they designed using the Nexus Valve system solve the noise problem, but when it was combined with new technology, the tool-less industrial strength Nex-Lok push-fit connection system, it allowed for a fast, clean installation that avoided damages in tight spaces. In fact, overall the contractor felt it ended up being an 80% faster install. Wouldn’t that be nice?

Want to read more about this case story? Click here and go to page 30 of the HVAC/P magazine.

To learn more about the Nexus Valves Dynamic valves/ Nex-Lok solution and how it could help make your next project more efficient and effective, give us a call at 800-355-7061.

Have a case story of how you were able to solve a customer challenge using our products? We’d love to feature it on our blog. Shoot us an email at sales@buymeinc.com to get the ball rolling.